White Elongated Smart Bidet Toilet with Heated Seat & Dryer

A fully featured smart bidet toilet that combines heated seating, adjustable water washing, warm-air drying, and multiple flush options—all controlled via remote or foot sensor.

Key Features

• Heated Seat: Five temperature settings up to 104°F for comfort in any season.
• Multiple Wash Modes: Rear, front, constant-temp, lady care, children, strong, and massage options with adjustable water pressure (4 levels) and temperature (5 levels).
• Warm-Air Dryer: Five adjustable temperature settings to reduce paper use and waste.
• Flexible Flushing: Auto-flush on sensor, foot induction, remote control, or manual knob. Battery backup enables ~2,500 flushes during power outages.
• High-Fired Ceramic Bowl: Micro-crystal glaze and pre-wet wall technology resist staining and reduce water consumption.
• Remote Control: Adjust all functions including spout position from your seat.

Specifications

• Material: High-temperature fired ceramic
• Color: White
• Length: 27.01 in.
• Width: 15.60 in.
• Height: 18.70 in.
• Weight: 85 lbs
• Seat Style: Elongated

What's in the Box

• One-piece smart bidet toilet
• Wireless remote control

Where it fits

This one-piece toilet fits standard residential bathrooms with a 12-inch rough-in (the distance from the finished wall to the center of the floor flange). One-piece construction means easier cleaning — no seam between tank and bowl traps dust or water.

FAQs

• What's the rough-in distance? 12 inches — measured from the finished wall to the center of the toilet drain. This is the most common residential rough-in. If your existing toilet is a 10" or 14" rough-in, this won't fit without reworking the flange.
• Water consumption? Meets WaterSense standards (≤1.28 GPF effective flush).
• Is the seat included? Yes — soft-close seat ships with the toilet. No separate purchase needed.
• Does it need strong water pressure? Designed for typical residential pressure (20–80 psi). The siphon-jet bowl design clears with as little as 30 psi.
• Can one person install this? Two people are recommended — one-piece toilets are heavy (typically 80–120 lbs). Plan 1–2 hours including wax ring + supply line.
• Is it ADA-compliant? Bowl height is comfort/chair-height (16.5–17 inches to seat top), which meets ADA accessibility recommendations. Check the spec table for the exact height of this model.